Hemp Oil Wood Finish

• New Finishing Product
• 100% Natural Hempseed Oil
• NO VOC’s

This solvent-free oil finish provides a protective, water-resistant surface. Use on new wood that is bare, stained, Milk-painted or to revive old wood effects. It penetrates to protect from the inside out. Does not leave a surface film that will chip or scratch. This food-safe oil finish is perfect to use in the kitchen on wood or stone. Used outside, it can restore the lustre of old oil based paint, revitalize surfaces such as cast iron and old wood. Try on an inconspicuous spot to see how it works. This oil will darken and richen the wood with a soft lustre.

Contains NO VOC's NO Petrochemicals.
This oil is a great environmentally friendly product.

Coverage:

• 500 ml - Covers a minimum of 40 square feet
• 1 Litre - Covers a minimum of 80 square feet
• 1 Gallon – Covers a minimum of 400 square feet
• 5 Gallons – Covers a minimum of 2000 square feet

Application: Surface must be dry. Use a brush or rag. Allow 12-24 hours between coats. With no solvents drying time is longer thus project should be well ventilated for several days.

Restore surface lustre: Using a rag, wipe area with a small amount of oil.

Previously oiled or waxed surfaces: Light sanding may be needed. Apply oil. In 30 minutes remove excess oil with buffing rag.

Bare or Stained Wood: Requires multiple coats. Apply the first coat liberally. Areas that absorb oil quickly, require more. After 30 minutes remove excess oil with a buffing rag. Subsequent coats require less oil. Most new wood will need 4 coats. Items used more often, i.e. tabletops require extra coats.

Clean-Up: Soap and Water

Coverage: at least 40 sq.ft. for a 500ml Size

Drytime: approx. 24 hrs

Maintenance: Apply a light coat every other year or as needed.

To remove scratches: spot sand then re-apply oil.

For additional protection on indoor furniture we recommend a coat of our Beeswax Finish to be applied a week after the last oil application.